Agilent Technologies J&W Non-Bonded Phases |
| Columns |
Examples of application |
| |
|
Carbowax 20M and HP-20M
CAM
DX-1, DX-3 and DX-4
SE-30 and SE-54
|
Phase 16
Amine Analysis
EPA Method 504
|
| |
| Carbowax 20M and HP-20M |
| |
- Polyethylene glycol, MW 20,000
- Equivalent to USP Phase G16
|
|
|
| |
Because the Carbowax 20M and the HP-20M are not bonded or cross-linked, we do not
recommend solvent rinsing. DB-WAX is the recommended bonded alternate for the HP-20M. |
| |
Similar Phases: DB-WAX, HP-INNOWax, DB-WAXetr
|
| |
| ID (mm) |
Length (m) |
Film (μm) |
Temp Limits (°C) |
Part No. |
| Carbowax 20M |
| 0.25 |
30 |
0.25 |
60 to 220/240 |
112-2032 |
| 0.32 |
30 |
0.25 |
60 to 220/240 |
113-2032 |
| HP-20M |
| 0.20 |
25 |
0.10 |
60 to 220 |
19091W-102 |
| 0.20 |
50 |
0.10 |
60 to 220 |
19091W-105 |
| 0.32 |
25 |
0.30 |
60 to 220 |
19091W-012 |
| 0.32 |
50 |
0.30 |
60 to 220 |
19091W-015 |
| 0.53 |
10 |
1.33 |
60 to 220 |
19095W-121 |
| 0.53 |
30 |
1.33 |
60 to 220 |
19095W-123 |
|
| |
CAM |
| |
- Base deactivated polyethylene glycol
- Specifically designed for amine analysis
- Excellent peak shape for primary amines
- Replaces HP-Basicwax
|
|
|
| |
Similar Phases: Stabilwax-DB, Carbowax Amine
|
| |
| ID (mm) |
Length (m) |
Film (μm) |
Temp Limits (°C) |
Part No. |
| |
|
|
|
|
| 0.25 |
15 |
0.25 |
60 to 220/240 |
112-2112 |
| 0.25 |
30 |
0.25 |
60 to 220/240 |
112-2132 |
| 0.25 |
30 |
0.50 |
60 to 220/240 |
112-2133 |
| 0.25 |
60 |
0.25 |
60 to 220/240 |
112-2162 |
| 0.32 |
30 |
0.25 |
60 to 220/240 |
113-2132 |
| 0.32 |
30 |
0.50 |
60 to 220/240 |
113-2133 |
| 0.53 |
30 |
1.00 |
60 to 200/220 |
115-2132 |
|
| |
DX-1, DX-3 and DX-4 |
| |
- DX-1: 90% Dimethylpolysiloxane - 10% Polyethylene Glycol
- DX-3: (50% Dimethylpolysiloxane)(50% Polyethylene Glycol)
- DX-4: 15% Dimethylpolysiloxane - 85% Polyethylene Glycol
|
|
|
| |
| Because DX series GC columns are not bonded and cross-linked, we do not recommend
solvent rinsing. |
| |
| ID (mm) |
Length (m) |
Film (μm) |
Temp Limits (°C) |
Part No. |
| DX-1 |
| 0.32 |
30 |
0.25 |
50 to 250/270 |
100-2000 |
| 0.32 |
30 |
1.00 |
50 to 250/270 |
123-6133 |
| 0.32 |
60 |
0.25 |
50 to 250/270 |
100-2000 |
| DX-3 |
| 0.25 |
15 |
0.25 |
50 to 250/270 |
100-2000 |
| 0.25 |
30 |
0.25 |
50 to 250/270 |
100-2000 |
| 0.32 |
30 |
0.25 |
50 to 250/270 |
100-2000 |
| DX-4 |
| 0.25 |
30 |
0.25 |
50 to 250/270 |
122-6432 |
| 0.25 |
60 |
0.25 |
50 to 250/270 |
122-6462 |
| 0.32 |
15 |
0.25 |
50 to 250/270 |
123-6412 |
| 0.32 |
30 |
0.25 |
50 to 250/270 |
123-6432 |
| 0.32 |
60 |
0.25 |
50 to 250/270 |
123-6462 |
|
| |
SE-30 and SE-54 |
| |
- SE-30: 100% Dimethylpolysiloxane
- SE-54: (5%-Phenyl)(1%-Vinyl)-methylpolysiloxane
|
|
|
| |
| Because SE series GC columns are not bonded and cross-linked, we do not recommend
solvent rinsing. |
| |
| ID (mm) |
Length (m) |
Film (μm) |
Temp Limits (°C) |
Part No. |
| SE-30 |
0.32 |
30 |
0.25 |
0 to 325/350 |
113-3032 |
| SE-54 |
| 0.25 |
30 |
0.25 |
0 to 325/350 |
112-5432 |
| 0.25 |
60 |
0.25 |
0 to 325/350 |
112-5462 |
| 0.32 |
30 |
0.25 |
0 to 325/350 |
113-5432 |
|
| |
