Agilent Technologies J&W Petroleum |
Petroleum applications vary greatly in character. From the noble gases to simulated distillation. Agilent offers a broad range of columns designed to meet the needs of the petroleum/petrochemical chromatographer. Refer to the PLOT column section for columns for the analysis of light gases. |
|
| |
Octane |
| |
|
| |
| DB-2887 |
| |
- 100% Dimethylpolysiloxane
- Specifically designed for simulated distillation using ASTM Method D2887
- Rapid conditioning, fast run time and low bleed when compared to packed columns
- Bonded and cross-linked
- Solvent rinsable
|
| |
| Similar Phases: HP-1, Petrocol EX2887, MXT-2887, MXT-1 |
| |
| ID (mm) |
Length (m) |
Film (μm) |
Temp Limits (°C) |
Part No. |
| |
|
|
|
|
| 0.53 |
10 |
3.00 |
-60 to 350 |
125-2814 |
|
| |
| DB-HT SimDis |
| |
- 100% dimethylpolysiloxane
- “Boiling point” phase for high temperature simulated distillation
- Durable stainless steel tubing
- 430ºC upper temperature limit
- Distillation range of C6 to C110+
- Low bleed – even at 430ºC!
- Bonded and cross-linked
- Solvent rinsable
|
| |
Similar Phases:
Petrocol EX2887, CP-SimDist Ultimetal, MXT-2887,
Rtx-2887, AC Controls High Temp Sim Dist, AT-2887 |
| |
| ID (mm) |
Length (m) |
Film (μm) |
Temp Limits (°C) |
Part No. |
| |
|
|
|
|
| 0.53 |
5 |
0.15 |
-60 to 400/430 |
145-1001 |
|
| |
| HP-PONA |
| |
- 100% Dimethylpolysiloxane
- Configured for the analysis of petroleum process products
- Tested to ensure the resolution of m-xylene from p-xylene and of cyclopentane
from 2,3-dimethylbutane
- PONA, PIANO
- High resolution
- Bonded and cross-linked
- Solvent rinsable
|
| |
Similar Phases: Petrocol DH, SPB-1, 007-1, Rtx-1, MXT-1
Note: 100 psi regulator required to reach optimum carrier gas velocity |
| |
| Description |
ID (mm) |
Length (m) |
Film (μm) |
Temp Limits (°C) |
Part No. |
| |
|
|
|
|
|
| HP-PONA |
0.20 |
50 |
0.50 |
-60 to 325/350 |
19091S-001 |
| HP-1 |
0.20 |
50 |
0.50 |
-60 to 325/350 |
19091Z-205 |
| HP-1 |
0.25 |
100 |
0.50 |
-60 to 325/350 |
19091Z-530 |
|
| |
| DB-Petro |
| |
- 100% Dimethylpolysiloxane
- Configured for the analysis of petroleum process products
- PONA, PIANO
- High resolution
- Bonded and cross-linked
- Solvent rinsable
|
| |
Similar Phases: Petrocol DH, HP-PONA, SPB-1, 007-1, Rtx-1, MXT-1
Note: 100 psi regulator required to reach optimum carrier gas velocity |
| |
| ID (mm) |
Length (m) |
Film (μm) |
Temp Limits (°C) |
Part No. |
| |
|
|
|
|
| 0.20 |
50 |
0.50 |
-60 to 325/350 |
128-1056 |
| 0.20 |
100 |
0.50 |
-60 to 325/350 |
122-10A6 |
|
| |
| HP-1 Aluminum Clad |
| |
- 100% Dimethylpolysiloxane
- Aluminum clad fused silica tubing
- For high temperature simulated distillation
- Bonded and cross-linked
- Solvent rinsable
|
| |
Similar Phases: N/A
|
| |
| ID (mm) |
Length (m) |
Film (μm) |
Temp Limits (°C) |
Part No. |
| |
|
|
|
|
| 0.53 |
5 |
0.09 |
-60 to 350/450 |
19095S-205 |
| 10 |
0.09 |
-60 to 350/450 |
19095S-200 |
|
| |
| |
| |
