| ASTM Method |
Method Title |
Column Recommendation |
Part No. |
| |
|
|
|
| D 3447 |
Standard Test Method for Purity of Halogentated Organic Solvents |
DB-624, 30 m x 0.53 mm, 3.00 µm |
125-1334 |
| D 3545 |
Standard Test Method for Alcohol Content and Purity of Acetate Esters by GC |
DB-624, 30 m x 0.53 mm, 3.00 µm |
125-1334 |
| D 3687 |
Standard Test Method for Analysis of Organic Vapors Collected by the Activated Charcoal Tube Adsorption Method |
DB-WAX, 30 m x 0.53 mm, 1.00 ìm |
125-7032 |
| DB-WAX, 30 m x 0.53 mm, 1.00 µm |
124-7032 |
| D 3695 |
Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection GC |
DB-WAX, 30 m x 0.53 mm, 1.00µm |
125-7032 |
| D 3710 |
Standard Test Method for Boiling Range Distribution of Gasoline and Gasoline Fractions by GC |
DB-2887, 10 m x 0.53 mm, 3.00µm |
125-2814 |
| D 3760 |
Standard Test Method for Analysis of Isopropylbenzene (Cumene) by GC |
DB-WAX, 60 m x 0.32 mm, 0.25 µm |
123-7062 |
| HP-1, 50 m x 0.32 mm, 0.52 µm |
19091Z-115 |
| D 3797 |
Standard Test Method for Analysis of o-Xylene by GC |
HP-INNOWax, 60 m x 0.32 mm, 0.50 µm |
19091N-216 |
| D 3798 |
Standard Test Method for Analysis of p-Xylene by GC |
HP-INNOWax, 60 m x 0.32 mm, 0.50 µm |
19091N-216 |
| D 3871 |
Standard Test Method for Purgeable Organic Compounds in Water Using Headspace Sampling |
DB-VRX, 75 m x 0.45 mm, 2.55 µm |
124-1574 |
| D 3893 |
Standard Test Method for Purity of Methyl Amyl Ketone and Methyl Isoamyl Ketone by GC |
DB-VRX, 30 m x 0.45 mm, 2.55 µm |
124-1534 |
| D 3973 |
Standard Test Method for Low-Molecular Weight Halogenated Hydrocarbons in Water |
DB-VRX, 30 m x 0.45 mm, 2.55 µm |
124-1534 |
| D 4415 |
Standard Test Method for Determination of Dimer in Acrylic Acid |
DB-FFAP, 30 m x 0.32 mm, 0.25 µm |
123-3232 |
| D 4424 |
Standard Test Method for Butylene Analysis by GC |
HP-PLOT Al2O3 "S", 50 m x 0.53 mm, 15.00 µm |
19095P-S25 |
| D 4443 |
Standard Test Method for Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl Chloride Homo- and Co-Polymers by Headspace GC |
DB-VRX, 30 m x 0.45 mm, 2.55 µm |
124-1534 |
| D 4735 |
Standard Test Method for Determination of Trace Thiophene in Refined Benzene by GC |
DB-FFAP, 30 m x 0.45 mm, 0.85 µm |
124-3232 |
| D 4773 |
Standard Test Method for Propylene Glycol Monomethyl Ether, Dipropylene Glycol Monomethyl Ether, and Propylene Glycol Monomethyl Ether Acetate |
Custom |
100-2000 |
| D 4864 |
Standard Test Method for Determination of Traces of Methanol in Propylene Concentrates by GC |
DB-WAX, 30 m x 0.45 mm, 0.85 µm |
124-7032 |
| D 4947 |
Standard Test Method for Chlordane and Heptachlor Residues in Indoor Air |
DB-5, 30 m x 0.53 mm, 1.50 µm |
125-5032 |
| DB-608, 30 m x 0.53 mm, 0.83 µm |
125-1730 |
| D 4961 |
Standard Test Method for GC Analysis of Major Organic Impurities in Phenol Produced by the Cumene Process |
DB-FFAP, 30 m x 0.45 mm, 0.85 µm |
124-3232 |
| HP-PLOT Q, 15 m x 0.53 mm, 40.00 µm |
19095P-QO3 |
| D 4983 |
Standard Test Method for Cyclohexylamine Morpholine and Diethylaminoethanol in Water and Condensed Steam by Direct Aqueous Injection GC |
HP-5MS, 30 m x 0.32 mm, 1.00 µm |
19091S-213 |
| CAM, 30 m x 0.53 mm, 1.00 µm |
115-2132 |
| D 3257 |
Standard Test Method for Aromatics in Mineral Spirits by GC |
DB-624, 30 m x 0.53 mm, 3.00 µm |
125-1334 |
| D 3329 |
Standard Test Method for Purity of Methyl Isobutyl Ketone by GC |
DB-WAX, 30 m x 0.53 mm, 1.00 ìm |
125-7032 |
| DB-624, 30 m x 0.45 mm, 2.55 µm |
124-1334 |
| D 3432 |
Standard Test Method for Unreacted Toluene Diisocyanates in Urethane Prepolymers and Coating Solutions by GC |
HP-1MS, 30 m x 0.32 mm, 1.00 µm |
19091S-713 |
| D 5008 |
Standard Test Method for Ethyl Methyl Pentonal Content and Purity Value of 2-Ethylhexanol by GC |
HP-1, 15 m x 0.53 mm, 5.00 µm |
19095Z-621 |
| HP-INNOWax, 30 m x 0.32 mm, 0.25 µm |
19091N-113 |
| D 5060 |
Standard Test Method for Determining Impurities in High-Purity Ethylbenzene by GC |
HP-INNOWax, 60 m x 0.32 mm, 0.50 µm |
19091N-216 |
| D 5075 |
Standard Test Method for Nicotine in Indoor Air |
DB-5, 30 m x 0.53 mm, 1.50 µm |
125-5032 |
| DB-5, 30 m x 0.32 mm, 1.00 µm |
123-5033 |
| D 5134 |
Standard Test Method for Detailed Analysis of Petroleum Naphthas Through n-Nonane by Capillary GC |
HP-PONA, 50 m x 0.20 mm, 0.50 µm |
19091S-001 |
| D 5135 |
Standard Test Method for Analysis of Styrene by Capillary GC |
HP-INNOWax, 60 m x 0.32 mm, 0.50 µm |
19091N-216 |
| D 5175 |
Standard Test Method for Organohalide Pesticides and Polychlorinated Biphenyls in Water by Microextraction and GC |
DB-1, 30 m x 0.32 mm, 1.00 µm |
123-1033 |
| DB-608, 30 m x 0.32 mm, 0.50 µm |
123-1730 |
| DB-XLB, 30 m x 0.25 mm, 0.25 µm |
122-1232 |
| D 5303 |
Standard Test Method for Trace Carbonyl Sulfide in Propylene by GC |
GS-GasPro, 30 m x 0.32 mm
|
113-4332 |
| HP-PLOT Q, 30 m x 0.53 mm, 40.00 µm |
19095P-QO4 |
| D 5307 |
Standard Test Method for Determination of Boiling Range Distribution of Crude Petroleum by GC |
HP-1, 7.5 m x 0.53 mm, 5.00 µm |
19095Z-627 |
| D 5310 |
Standard Test Method for Tar Acid Composition by Capillary GC |
HP-5MS, 30 m x 0.25 mm, 0.25 µm |
19091S-433 |
| DB-225ms, 30 m x 0.25 mm, 0.25 µm |
122-2932 |
| D 5316 |
Standard Test Method for 1, 2-Dibromoethane and 1, 2-Dibromo-3-Chloropropane in Water by Microextraction and GC |
HP-1MS, 30 m x 0.32 mm, 1.00 µm |
19091S-713 |
| |
|
DB-624, 30 m x 0.45 mm, 2.55 µm |
124-1334 |
| D 5317 |
Standard Test Method for Determination of Chlorinated Organic Acid Compounds in Water by GC with Electron Capture Detector |
HP-5MS, 30 m x 0.25 mm, 0.25 µm |
19091S-433 |
| DB-1701P, 30 m x 0.25 mm, 0.25 µm |
122-7732 |
| DB-XLB, 30 m x 0.25 mm, 0.25 µm |
122-1232 |
| DB-35ms, 30 m x 0.25 mm, 0.25 µm |
122-3832 |
| D 5320 |
Standard Test Method for Determination of 1, 1-Trichloroethane and Methylene Chloride in Stabilized Trichloroethylene and Tetrachloroethylene |
DB-1, 30 m x 0.53 mm, 3.00 µm |
125-1034 |
| DB-VRX, 30 m x 0.32 mm, 1.80 µm |
123-1534 |
| D 5399 |
Standard Test Method for Boiling Point Distribution of Hydrocarbon Solvents by GC |
DB-2887, 30 m x 0.32 mm, 1.80 µm |
125-2814 |
| D 5441 |
Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBD) by GC |
HP-PONA, 50 m x 0.20 mm, 0.50 µm |
19091S-001 |
| DB-Petro, 100 m x 0.25 mm, 0.50 µm |
122-10A6 |
| D 5442 |
Standard Test Method for Analysis of Petroleum Waxes by GC |
DB-1, 25 m x 0.32 mm, 0.25 µm |
123-1022 |
| DB-5, 15 m x 0.25 mm, 0.25 µm |
122-5012 |
| D 5475 |
Standard Test Method for Nitrogen- and Phosphorus-Containing Pesticides in Water by GC with a Nitrogen Phosphorus Detector |
HP-5MS, 30 m x 0.25 mm, 0.25 µm |
19091S-433 |
| DB-1701P, 30 m x 0.25 mm, 0.25 µm |
122-7732 |
| DB-XLB, 30 m x 0.25 mm, 0.25 µm |
122-1232 |
| DB-35ms, 30 m x 0.25 mm, 0.25 µm |
122-3832 |
| D 5480 |
Standard Test Method for Engine Oil Volatility by GC |
DB-PS1, 15 m x 0.53 mm, 0.15 µm |
145-1011 |
| D 5501 |
Standard Test Method for Determination of Ethanol Content of Denatured Fuel Ethanol by GC |
HP-1, 100 m x 0.25 mm, 0.50 µm |
19091Z-530 |
| D 5507 |
Standard Test Method for Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multi-dimensional GC |
HP-PLOT Q, 15 m x 0.53 mm, 40.00 µm |
19095P-QO3 |
| HP-PLOT U, 30 m x 0.53 mm, 0.20 µm |
19095P-UO4 |
| D 5508 |
Standard Test Method for Determinationof Residual Acrylonitrile Monomer in Styrene-Acyrlonitrile Co-polymer Resins and Nitrile-Butadiene Rubber by Headspace Capillary GC |
HP-PLOT Q, 30 m x 0.53 mm, 40.00 µm |
19095P-QO4 |
| D 5580 |
Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by GC |
DB-1, 30 m x 0.53 mm, 5.00 µm |
125-1035 |
| D 5599 |
Standard Test Method for Determination of Oxygenates in Gasoline by GC and Oxygen Selective Flame Ionization Detection |
DB-5, 30 m x 0.25 mm, 0.25 µm |
122-5032 |
| D 5623 |
Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by GC and Sulfur Selective Detection |
HP-1, 30 m x 0.32 mm, 4.00 µm |
19091Z-613 |
| D 5713 |
Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary GC |
DB-Petro, 50 m x 0.20 mm, 0.50 µm |
128-1056 |
| D 5739 |
Standard Practice for Oil Spill Source Identification by GC and Positive Ion Electron Impact Low Resolution Mass Spectrometry |
DB-5, 30 m x 0.25 mm, 0.25 ìm |
122-5032 |
| DB-TPH, 30 m x 0.32 mm, 0.25 µm |
123-1632 |
| D 5769 |
Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasoline by GC/MS |
HP-1, 60 m x 0.25 mm, 1.00 µm |
19091Z-236 |
| D 5790 |
Standard Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column GC/MS |
DB-VRX, 60 m x 0.25 mm, 1.40 ìm |
122-1564 |
| DB-VRX, 20 m x 0.18 mm, 1.00 µm |
121-1524 |
| DB-624, 60 m x 0.25 mm, 1.40 µm |
122-1364 |
| DB-624, 20 m x 0.18 mm, 1.00 µm |
121-1324 |
| D 5812 |
Standard Test Method for Determination of Organochlotine Pesticides in Water by Capillary Column GC |
HP-5MS, 30 m x 0.25 mm, 0.25 µm |
19091S-433 |
| DB-1701P, 30 m x 0.25 mm, 0.25 µm |
122-7732 |
| DB-XLB, 30 m x 0.25 mm, 0.25 µm |
122-1232 |
| DB-35ms, 30 m x 0.25 mm, 0.25 µm |
122-3832 |
| D 5917 |
Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by GC and External Calibration |
HP-INNOWax, 60 m x 0.32 mm, 0.25 µm |
19091N-116 |
| D 5974 |
Standard Test Method for Fatty and Rosin Acids in Tall Oil Fraction Products by Capillary GC |
DB-23, 60 m x 0.25 mm, 0.25 µm |
122-2362 |
| D 5986 |
Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8-C12 Aromatics and Total Aromatics in Finished Gasoline by GC/FTIR |
HP-1, 60 m x 0.53 mm, 5.00 µm |
19095Z-626 |
| D 6144 |
Standard Test Method for Trace Impurities in Alpha-Methylstyrene by Capillary GC |
HP-1, 60 m x 0.25 mm, 1.00 µm |
19091Z-236 |
| D 6159 |
Standard Test Method for Determination of Hydrocarbon Impurities in Ethylene by GC |
HP-PLOT Al2O3 "KCl", 50 m x 0.53 mm, 15.00 µm |
19095P-K25 |
| GS-Alumina, 50 m x 0.53 mm, |
115-3552 |
| DB-1, 50 m x 0.53 mm, |
125-1035 |
| D 6160 |
Standard Test Method for Determination of PCBs in Waste Materials by GC |
HP-5MS, 30 m x 0.32 mm, 0.25 µm |
19091S-413 |
| D 6352 |
Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700 by GC |
DB-HT SimDis, 5 m x 0.53 mm, 0.15 µm |
145-1001 |
| D 6417 |
Standard Test Method for Estimation of Engine Oil Volatility by Capillary GC |
DB-HT SimDis, 5 m x 0.53 mm, 0.15 µm |
145-1001 |
| D 2360 |
Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by GC |
HP-INNOWax, 60 m x 0.32 mm, 0.25 µm |
19091N-116 |
| E 1616 |
Standard Test Method for Analysis of Acetic Anhydride Using GC |
HP-1, 50 m x 0.32 mm, 0.52 µm |
19091Z-115 |
| E 1863 |
Standard Test Method for Analysis of Acrylonitrile By GC |
DB-WAXetr, 60 m x 0.32 mm, 1.00 µm |
123-7364 |
| E 202 |
Standard Test Method for Analysis of Ethylene Glycols and Propylene Glycols |
DB-624, 30 m x 0.53 mm, 3.00 µm |
125-1334 |
| E 475 |
Standard Test Method for Assay of Di-tert-Butyl Peroxide Using GC |
HP-5, 30 m x 0.53 mm, 5.00 µm |
19095J-623 |
