Agilent Technologies Oxygen Traps |
Agilent Indicating Oxygen Traps:
- Reduces oxygen to less than 1 ppb
- Environmentally safe
- Available in two sizes, standard and large—three times the capacity
|
| |
|
|
The following trap options are available
|
| |
|
|
Indicating Oxygen Traps (IOT & LIOT)
Oxygen and a wide range of oxides react with the activated bed material to form a
manganese oxide. This reaction results in a progressive and dramatic color change, from light
green in the adsorbent’s active state to deep brown as oxygen saturation occurs. The
Indicating Oxygen Trap is designed to be used in conjunction with any of our high capacity,
non-indicating oxygen traps. When properly installed downstream from the non-indicating
trap, the Indicating Oxygen Trap provides a visual indication of oxygen breakthrough BEFORE
contamination reaches sensitive system components.
Unlike adsorbent materials utilized in competitive products, our indicating media can be
exposed to air and water in virtually any quantity without resulting in an exothermic reaction.
The spent product is nontoxic, nonhazardous, nonflammable, and nonreactive. The high
impact Lexan shield prevents “lab catastrophes” if the trap is exposed to pressure beyond its
stated pressure limit. Safe for land-fill refuse. |
 |
| |
|
|
Description |
Size (cc) |
Fitting (in.) |
Part Number |
| |
|
|
|
Indicating Oxygen Trap |
30 |
1/8 in. |
IOT-2-HP |
Indicating Oxygen Trap |
30 |
1/4 in. |
IOT-4-HP |
Large Indicating Oxygen Trap |
150 |
1/8 in. |
LIOT-2 |
Large Indicating Oxygen Trap |
150 |
1/4 in. |
LIOT-4 |
| Mounting Clip for IOT traps |
UMC-2 |
| Mounting clip for LIOT traps |
UMC-3 |
|
| |
|
|
|
|
| |
Big Oxygen Traps (BOT Series)
- Capacity: 3 liters O2 or 3,200 mg
- Pressure: Up to 250 psig
- Efficiency: reduction of O2 to less than 1 ppb
- 750 cubic centimeter gas purifiers
- Ideal for bulk purification applications or where several instruments are plumbed from a single gas source
- One piece of heavy-walled aluminum tube. This one-piece design eliminates potential leaks
- Equipped with sintered stainless steel frits to prevent particulate contamination
|
 |
| |
Description |
Size (cc) |
Fitting (in.) |
Part Number |
| |
|
|
|
Big Oxygen Trap |
750 |
1/8 |
BOT-2 |
Big Oxygen Trap |
750 |
1/4 |
BOT-4 |
Mounting clip |
|
UMC-5-2 |
|
| |
