Corona
Corona Gas Generators from Peak Scientific
The Corona series has been developed to meet the requirements of the Thermo Scientific Corona Veo Charged Aerosol Detector.
Corona Nitrogen 1010 Nitrogen Generator
Peak’s Corona 1010 model has been developed to meet the demands of labs requiring high purity nitrogen for their applications. Suitable primarily for Charged Aerosol Detectors, the Corona 1010 generator delivers a high-purity, filtered nitrogen supply for applications requiring flows of up to 5 L/min at 80 psi.
Corona Air Compressor from Peak Scientific
The Corona Air Compressor has been engineered to stack neatly with the Corona 1010 Nitrogen generator providing compressed air for laboratories without an external source of gas.
Corona Nitrogen 1010 Nitrogen Generator
- Suitable for applications requiring high purity nitrogen
- Available with or without an external compressor
- Dedicated solution for Thermo Scientific's Corona and Vanquish instruments
- Tried and tested membrane technology delivers laboratory-grade nitrogen
- Gas is supplied on demand so generator works to your schedule
- 12 month comprehensive on-site warranty
Corona Air Compressor
- Stackable with Corona 1010 Nitrogen
- Provides air for Corona system for labs without an external supply
- Gas is supplied on demand so generator works to your schedule
- 12 month comprehensive on-site warranty
| Corona Nitrogen 1010 | |
| Max Flow Rate | 5 L/min |
| Max Pressure | 80 psi / 5.5 bar |
| Purity | <2% 02 @ 5 L/min |
| Gas Outlets | 1 x 1/4" BSPP |
| Min Air Inlet Pressure | 7.6 bar / 110 psi |
| Min Air Inlet Flow | 30 L/min |
| Min Inlet Air Quality | ISO8573 - 1:2010 Class 1.4.1 |
| Phthalates | None |
| Suspended Liquids | None |
| Start-Up Time For Purity | 5 minutes |
| Operating Temperature | 5 - 35°C |
| Electrical Requirements | 110-230 VAC 50/60 HZ 0.03 A |
| Power Consumption | 10 watts |
| Heat Output | Up to 140 BTU/Hr |
| Generator Dimensions (W x D x H) | 41.7 cm x 54 cm x 15.6 cm / 16.4" x 21.3" x 6.1“ |
| Generator Weight | 12 Kg / 26.4 lbs |
| Corona Air Compressor | ||
| Minimum Operating Ambient Temperature | 5°C | |
| Maximum Operating Ambient Temperature | 35°C | |
| Maximum Altitude | 2000 m | |
| Maximum Relative Humidity | 80% Non-Condensing | |
| Minimum Storage Temperature | -20°C | |
| Maximum Storage Temperature | 60°C | |
| Maximum Flow Rate | 30 L/min | |
| Maximum Pressure | 7.58 bar / 110 psi | |
| Particles | <0.01 µm | |
| Phthalates | None | |
| Suspended Liquids | None | |
| Gas Outlets | 1 x 1/4" BSPP | |
| Drain Outlets | 1 x 1/4" BSPP | |
| Pressure Gauges | 1 | |
| Voltage | 230 VAC | |
| Frequency | 50/60 Hz | |
| Current | 2.8 A | |
| Input Connection | C14 Plug | |
| Power Cord (Supplied) | C13 Socket to Local Connection | |
| Pollution Degree | 2 | |
| Insulation Category | II | |
| Dimensions (W x D x H) | 41.6 cm x 54 cm x 40.6 cm / 16.3" x 21.2" x 15.8" | |
| Compressor Weight | 41.5 Kg / 91.5 lbs | |
| Shipping Weight | 64 Kg / 141 lbs | |
