large image
*Element, Strathaven will be closing at 12.00pm on the 23rd of December and will re-open on the 4th of January.* Find out more »
Loading...

CP-SimDist

CP-SimDist GC Columns from Agilent

Agilent J&W CP-SimDist columns are guaranteed for simulated distillation up to C100. These columns are low bleed, typically only 4 to 5 pA at 400 °C. The high temperature stationary phase and polyimide coating extend column lifetimes.

    Agilent J&W CP-SimDist columns are also available in UltiMetal deactivated stainless steel tubing. Perform extended analysis to C120, and it is guaranteed to a Tmax of 450 °C, due to the virtually unbreakable inert UltiMetal tubing. The internal diameter of UltiMetal tubing is the same as for fused silica 0.53 mm id (Megabore) columns, providing trouble-free automation of on-column injection. The special deactivation applied to the UltiMetal surface gives better retention time repeatability than any other high temperature column. This column is designed for ASTM D2887 and the extended D2887 method compliance.

Part Number Short Description Film Thickness Phase ID Length Type Material Price Qty
CP7522I5 5in cage CP-SimDist 5m x 0.53mm x 0.17um 0.17 um CP-SimDist 0.53 mm 5 m 5 inch Fused Silica
£467.00
CP7512I5 5in cage CP-SimDist UltiMetal 10m x 0.53mm x 0.88um 0.88 um CP-SimDist 0.53 mm 10 m 5 inch UltiMetal
£844.00
CP7569I5 5in cage CP-SimDist UltiMetal 5m x 0.53mm x 0.09um 0.09 um CP-SimDist 0.53 mm 5 m 5 inch UltiMetal
£725.00
CP7532I5 5in cage CP-SimDist UltiMetal 5m x 0.53mm x 0.17um 0.17 um CP-SimDist 0.53 mm 5 m 5 inch UltiMetal
£725.00
CP7521 CP-SimDist 10m x 0.32mm x 0.1um 0.10 um CP-SimDist 0.32 mm 10 m 7 inch Fused Silica
£569.00
CP7541 CP-SimDist 10m x 0.53mm x 0.1um 0.10 um CP-SimDist 0.53 mm 10 m 7 inch Fused Silica
£819.00
CP7522 CP-SimDist 5m x 0.53mm x 0.17um 0.17 um CP-SimDist 0.53 mm 5 m 7 inch Fused Silica
£424.00
CP7542 CP-SimDist UltiMetal 10m x 0.53mm x 0.17um 0.17 um CP-SimDist 0.53 mm 10 m 7 inch UltiMetal
£811.00
CP7592 CP-SimDist UltiMetal 10m x 0.53mm x 0.53um 0.53 um CP-SimDist 0.53 mm 10 m 7 inch UltiMetal
£767.00
CP7512 CP-SimDist UltiMetal 10m x 0.53mm x 0.88um 0.88 um CP-SimDist 0.53 mm 10 m 7 inch UltiMetal
£767.00
CP7562 CP-SimDist UltiMetal 10m x 0.53mm x 1.2um 1.20 um CP-SimDist 0.53 mm 10 m 7 inch UltiMetal
£767.00
CP7582 CP-SimDist UltiMetal 10m x 0.53mm x 2.65um 2.65 um CP-SimDist 0.53 mm 10 m 7 inch UltiMetal
£767.00
CP7572 CP-SimDist UltiMetal 10m x 0.53mm x 5um 5.00 um CP-SimDist 0.53 mm 10 m 7 inch UltiMetal
£767.00
CP7593 CP-SimDist UltiMetal 20m x 0.53mm x 0.11um 0.11 um CP-SimDist 0.53 mm 20 m 7 inch UltiMetal
£1,358.00
CP7569 CP-SimDist UltiMetal 5m x 0.53mm x 0.09um 0.09 um CP-SimDist 0.53 mm 5 m 7 inch UltiMetal
£659.00
CP7532 CP-SimDist UltiMetal 5m x 0.53mm x 0.17um 0.17 um CP-SimDist 0.53 mm 5 m 7 inch UltiMetal
£659.00
CP7570 CP-SimDist UltiMetal 5m x 0.53mm x 0.88um 0.88 um CP-SimDist 0.53 mm 5 m 7 inch UltiMetal
£659.00
CP7571 CP-SimDist UltiMetal 5m x 0.53mm x 2.65um 2.65 um CP-SimDist 0.53 mm 5 m 7 inch UltiMetal
£702.00

CP-SimDist GC Columns

  • For simulated distillation analysis up to C100
  • High temperature non-polar stationary phase
  • Low bleed improves quantitation
  • High temperature polyimide coating extends lifetime

Similar Phases: Petrocol EX2887, MXT-2887, Rtx-2887, AC Controls High Temp Sim Dist, AT-2887, ZB-1XT SimDist


CP-SimDist UltiMetal GC Columns

  • Designed for ASTM D2887 and the extended D2887 method compliance
  • Low bleed
  • Extended analysis to C120 with maximum temperature of 450 °C
  • UltiMetal tubing for excellent durability (same id as 0.53 mm id fused silica)
  • Excellent retention time repeatability and column lifetime due to special deactivation of UltiMetal surface

Similar Phases: Petrocol EX2887, MXT-2887, Rtx-2887, AC Controls High Temp Sim Dist, AT-2887, ZB-1XT SimDist

CP-SimDist Temperature Specifications

ID (mm) 0.32 mm 0.53 mm
Length (m) 10 m 5-10 m
Film (µm)  0.10 µm 0.10 - 0.17 µm
Temperature Limits (°C) 375/400 °C 375/400 °C

 

CP-SimDist UltiMetal Temperature Specifications

ID (mm) 0.53 mm
Length (m) 5 - 25 m
Film (µm) 0.06 - 5.00 µm
Temperature Limits (°C) 400/400 °C (2.65, 5.00 µm)
450/450 °C (0.06 - 1.20 µm)
Agilent GC Column Brochure (11.67 MB)

Full range of Agilent Technologies GC columns and applications

Copyright © 2022 Element Materials Technology