DB-1 GC Columns from Agilent
100% dimethylpolysiloxane columns are non-polar, low-bleed, and operate under high temperature limits. They are an excellent choice for general purpose use in a wide variety of applications.
- DB-1 - reliable, cross-linked and non-polar column with low bleed and a high temperature limit, delivering superb performance for general purpose applications
- DB-1ht - specially processed for extended temperature limits of 400 °C with excellent peak shape and faster elution times for high boilers
- DB-1ms - excellent general-purpose GC column and ideal for GC/MS of active analytes commonly found in drug screening and environmental analyses
- DB-1ms Ultra Inert - provides consistent column inertness performance to ensure sensitivity, performance and integrity in trace analysis
DB-1 GC Columns
Agilent J&W DB-1 is non-polar and low-bleed, and operates under high temperature limits. It is an excellent choice for general purpose use in a wide variety of applications. Precision-engineered DB-1 is bonded, cross-linked and solvent rinsable, and is equivalent to USP phase G2.
- 100% Dimethylpolysiloxane
- Non-polar and low bleed with a high temperature limit
- Wide range of applications
- Bonded, cross-linked and solvent rinsable
- Equivalent to USP Phase G2
- Available with DuraGuard (GC column with a built-in guard column)
Similar Phases: SPB-1, Rtx-1, BP-1, OV-1, OV-101, 007-1(MS), SP-2100, SE-30, ZB-1, AT-1, MDN-1, ZB-1
DB-1ht GC Columns
Agilent J&W DB-1ht delivers excellent performance in a range of GC/MS applications and are manufactured to the highest levels of quality and stability. Nonpolar DB-1ht columns are specially processed for operation up to 400 °C, with optimized, polyimide-coated fused silica tubing. These bonded and cross-linked columns also deliver excellent peak shape and faster elution times for high boiling compounds and are solvent rinsable.
- 100% Dimethylpolysiloxane
- Non-polar
- Specially processed for extended temperature limit of 400 °C
- High temperature, polyimide-coated, fused silica tubing
- Excellent peak shape and faster elution times for high boilers
- Bonded and cross-linked
- Solvent rinsable
Similar Phases: Rxi-1HT, Stx-1ht, ZB-1ht
DB-1ms GC Columns
Agilent J&W DB-1ms is a nonpolar, low bleed column, with excellent inertness for acids and bases and an extended upper temperature limit. Using low bleed stationary phases in DB-1ms reduces column contribution to background noise, resulting in a higher signal-to-noise ratio and better sensitivity. DB-1ms is bonded and cross-linked. In addition, reduced bleed results in improved mass-spectral purity and accurate library identification. The inertness of DB-1ms provides maximum response for active analytes commonly found in drug screening and environmental analyses.
- 100% Dimethylpolysiloxane
- Identical selectivity to DB-1
- Very low bleed characteristics, ideal for GC/MS
- Improved acid performance compared to standard 100% Dimethylpolysiloxane columns
- Improved signal-to-noise ratio for better sensitivity and mass spectral integrity
- Bonded and cross-linked; solvent rinsable
Similar Phases: SPB-1, Rtx-1, BP-1, OV-1, OV-101, 007-1(MS), SP-2100, SE-30, ZB-1, AT-1, MDN-1, ZB-1, ZB-1ms
DB-1ms Ultra Inert GC Columns
Agilent J&W DB-1ms Ultra Inert delivers consistent column inertness performance to ensure sensitivity, performance, and integrity. With excellent peak shapes, exceptionally low bleed and high signal-to-noise ratios, DB-1ms Ultra Inert performs effectively with even the most challenging active analytes. DB-1ms is also individually tested with Ultra Inert 1ms test probe mixture for peace of mind. An inert GC flow path further enhances performance.
- Individually tested with Ultra Inert 1ms test probe mixture
- Consistent column inertness performance and exceptionally low column bleed
- High quality peak shapes for challenging active analytes
- Excellent signal-to-noise ratios
- Minimum compound adsorption or degradation
- Supports 0.18 mm id column configuration for higher sample throughput
Similar Phases: SPB-1, Rtx-1, BP-1, OV-1, OV-101, 007-1(MS), SP-2100, SE-30, ZB-1, AT-1, MDN-1, ZB-1, ZB-1ms
DB-1 Temperature Specifications
| ID (mm) | 0.05 – 0.10 mm | 0.15 – 0.32 mm | 0.45 – 0.53 mm |
| Length (m) | 10 – 40 m | 10 – 150 m | 5 – 105 m |
| Film (µm) | 0.05 – 0.40 µm | 0.01 - 5.00 µm | 0.15 – 5.00 µm |
| Temperature Limits (°C) | -60 – 325/350 °C | -60 – 325/350 °C -60 – 300/320 °C (1.50 µm) -60 – 280/300 °C (2.00, 3.00, 5.00 µm) |
-60 – 260/280 °C (2.55, 2.65, 3.00, 5.00 µm)
-60 – 300/320 °C (0.50, 1.00, 1.50 µm)
-60 – 320/340 °C (0.25 µm)
-60 – 320/350 °C (1.50, 2.65 µm)
-60 – 325/350 °C (1.27, 2.65, 5.00 µm)
-60 – 340/360 °C (0.10, 0.15 µm)
|
DB-1ht Temperature Specifications
| ID (mm) | 0.25 – 0.32 mm | 0.53 mm |
| Length (m) | 15 – 30 m | 30 m |
| Film (µm) | 0.10 µm | 0.17 µm |
| Temperature Limits (°C) | -60 - 400 °C | -60 - 400 °C |
DB-1ms Temperature Specifications
| ID (mm) | 0.10 mm | 0.18 – 0.32 mm |
| Length (m) | 10 – 20 m | 12 – 60 m |
| Film (µm) | 0.10 – 0.40 µm | 0.10 – 0.33 µm |
| Temperature Limits (°C) | -60 – 340/360 °C |
-60 – 340/350 °C (0.33 µm)
-60 – 340/360 °C
|
DB-1ms Ultra Inert Temperature Specifications
| ID (mm) | 0.18 – 0.32 mm |
| Length (m) | 15 – 60 m |
| Film (µm) | 0.18 – 0.25 µm |
| Temperature Limits (°C) | -60 – 340/360°C |
Agilent GC Column Brochure
(11.67 MB)
Full range of Agilent Technologies GC columns and applications