SCAT Exhaust Filters
SCAT exhaust filters are designed to ensure the safety and cleanliness of your working environment by absorbing solvent vapours, dust particles, and dirt. The SCAT exhaust filters can be installed on all SCAT safety waste caps and universal waste hubs Jan.
The new SCAT exhaust filter V3.0 guarantees over 90% CTC adsorption for maximum air purity due to three integrated activated carbon types. This makes it the most powerful activated carbon filter medium on the HPLC laboratory market.
The exhaust filter has been optimized for the binding of eluents, as typically used in HPLC. The lifetime of the filter is dependent on the composition of the collected waste, the temperature, and the flowrate. These factors can vary significantly, so it is recommended to replace the exhaust filter every 3 months for the small size; 6 months for the medium size; and 12 months for the large size, for optimum protection.
Available in a version with a label to fill in the expiry date by hand, or with an indicator on which you press a button to activate the countdown for the service life.
- SCAT exhaust filters block the exit of hazardous vapours and ensure for safe pressure equalization in the waste containers of your HPLC systems
- The use of exhaust filters can contribute to the reduction of the air exchange rate
- Filled with activated carbon optimized for solvent vapors and VOCs
- Exhaust Filter V3.0 has three types of active carbon for more safety
- Tested as per official ASTM / DIN / ISO test methods
- Conforms to the requirements of flammability classification V-0 (UL-94)
- Offset adapters can be used to adjust the position of the exhaust filter
- Precise indication of when to replace by an indicator
- Available as both single pack and economy packs
- Available in sizes (S/M/L) with different service lives (3/6/12 months)
- Available in sizes XL and XXL for use with drums and barrels
SCAT exhaust filters block off harmful vapours and ensure for safe pressure equalization in the waste containers of HPLC systems. The active carbon has been optimized for taking up organic solvent vapours and has been tested, using official ASTM/DIN/ISO test methods.
| Exhaust Filter V3.0 | Test Method | |
| Ball-Pan-Hardness (weight percent) | 96% | ASTM D 3802 |
| Inner Surface Area | 1,500 m2/g | DIN ISO 9277 |
| Shake Density | 415 ± 30 kg/m3 | ASTM D 2854 |
| CTC-Adsorption (weight percent) | >90% | ASTM D 3467 |
| Grain Diameter | 1.4 - 3 mm | ASTM D 2862 |
| Weight of Residue (weight percent) | max. 5% | ASTM D 2866 |
| Water Content (weight percent) | max. 5% | ASTM D 2867 |
SCAT Exhaust Filter V3.0 Brochure
(2.04 MB)
SCAT Exhaust Filter Overview
(463.63 kB)
SCAT Safety Solutions Catalogue HPLC Disposal
(19.02 MB)
