Agilent Intuvo Ultra Inert GC Columns
All pictures shown are for illustration purpose only. Actual product may vary.
As part of the Agilent J&W Ultra Inert GC column family, Ultra Inert Intuvo GC columns (compatible only with the Intuvo 9000 GC System) push industry standards for consistent column inertness and exceptionally low column bleed, resulting in lower detection limits and more accurate data for difficult analytes.
Offered in a wide range of stationary phase polarities (non, low, mid, and high polarity), each Ultra Inert Intuvo GC column is tested with the industry’s most demanding test probe mixture, and a performance summary sheet is shipped with each column.
Features
- Wide selection of stationary phase polarities are available (non, low, mid, and high polarity)
- Strict quality control specifications and testing ensure long-term column-to-column performance and accurate separations
- Part of an optimized GC flow path with Agilent Ultra Inert Liners, low-bleed septa, certified vials and gas clean filters
“ms” column have very low bleed characteristics, and are ideal for GC/MS applications. Low bleed stationary phases reduces column contribution to background noise, resulting in an improved signal-to-noise ratio for better sensitivity and mass spectral integrity.
Compatible only with the Agilent Intuvo 9000 GC System
All Intuvo GC columns include a Smart Key, which enables the system to immediately identify the column configuration and temperature limits (including column part and serial numbers), as well as tracking the use of the column.
Specification
DB-1ms UI Temperature Specifications
| ID | 0.25 – 0.32 mm |
| Length | 15 – 60 m |
| Film | 0.25 µm |
| Temperature Limits | -60 – 340/360°C |
DB-5ms UI Temperature Specifications
| ID | 0.18 – 0.32 mm |
| Length | 15 – 60 m |
| Film | 0.18 – 0.50 µm |
| Temperature Limits | -60 – 325/350°C |
DB-35ms UI Temperature Specifications
| ID | 0.18 – 0.32 mm |
| Length | 15 – 30 m |
| Film | 0.18 – 0.25 µm |
| Temperature Limits | 50 – 340/360°C |
DB-624 UI Temperature Specifications
| ID | 0.25 mm |
| Length | 30 m |
| Film | 1.40 µm |
| Temperature Limits | -20 – 260°C |
DB-Select 624 UI Temperature Specifications
| ID | 0.25 – 0.32 mm |
| Length | 15 – 30 m |
| Film | 1.40 – 1.80 µm |
| Temperature Limits | 40 – 260/260°C |
DB-WAX UI Temperature Specifications
| ID | 0.18 – 0.25 mm |
| Length | 5 – 20 m |
| Film | 0.18 – 0.25 µm |
| Temperature Limits | 20 – 250/260°C |
DB-FATWAX UI Temperature Specifications
| ID | 0.18 – 0.32 mm |
| Length | 20 – 30 m |
| Film | 0.18 – 0.25 µm |
| Temperature Limits | 20 – 250/260°C |
HP-1ms UI Temperature Specifications
| ID | 0.18 – 0.32 mm |
| Length | 5 – 30 m |
| Film | 0.18 – 0.25 µm |
| Temperature Limits | -60 – 325/350°C |
HP-5ms UI Temperature Specifications
| ID | 0.18 – 0.32 mm |
| Length | 10 - 60 m |
| Film | 0.18 – 1.00 µm |
| Temperature Limits | -60 – 325/350°C |
Literature
Full range of Agilent Technologies GC columns and applications
Agilent Product Manager's recommendations: top supplies to optimize your Intuvo GC-MS workflow