Agilent IDP-10 Oil Free Vacuum Pump
All pictures shown are for illustration purpose only. Actual product may vary.
The Agilent IDP-10 oil-free scroll pump is designed to deliver high-capacity vacuum for demanding GC-MS applications, including triple quadrupole systems. Operating on an orbital dual-scroll compression principle, gas is drawn in at the pump perimeter and progressively compressed towards the central exhaust, enabling efficient pump-down and high gas throughput. Its low base pressure supports effective turbo molecular pump performance, helping to maintain stable analytical conditions during sustained or high-load operation.
Delivering a pumping speed of 170 L/min (10.2 m³/h), the IDP-10 is suited to instruments such as the Agilent 7000 and 7010 Series triple quadrupole GC-MS systems. Its oil-free design reduces environmental impact and laboratory safety considerations associated with oil-sealed pumps, while the sealed motor arrangement helps prevent catastrophic failure modes related to contamination. The unit’s reduced utility requirements, low acoustic output, and minimal vibration allow flexible placement within laboratory layouts without the need for specialised electrical supply.
Features
- High-Throughput Scroll Compression – Maintains strong vacuum under increased gas loads typical of triple quadrupole operation
- 170 L/min Pumping Capacity – Supports rapid pump-down times and sustained performance in high-demand GC-MS systems
- Low Ultimate Pressure Capability – Enhances turbo pump efficiency and contributes to improved analytical stability
- Dry Pump Technology – Removes the need for oil mist filtration and reduces hazardous waste generation
- Integrated Isolation Valve Protection – Helps safeguard connected vacuum components during power interruptions
- Reduced Routine Servicing – Designed for infrequent maintenance intervals with straightforward replacement of wear components
Specification
| IDP-3 Oil Free Vacuum Pump | |
| Peak pumping speed | 170 L/min (10.2 m3/h) at full speed |
| Ultimate pressure | 2.0 x 10-2 mbar (1.5 x 10-2 Torr) |
| Maximum inlet pressure | 1.0 atmosphere (0 psig) |
| Maximum outlet pressure | 1.34 atmosphere (5 psig) |
| Inlet connection | NW25 |
| Exhaust connection | NW16 |
| Gas ballast connection | Female 0.25 inch NPT (20 μm sintered plug provided) SAE-2 5/16-24 |
| Water vapor handling per Pneurop 6602 | 120 grams/hr maximum |
| Ambient operating temperature | 5 to 40°C |
| Storage temperature | -20 to 60°C |
| Motor rating | 0.5 HP (350 W); 3ø inverter driven |
| Operating voltages | 100-127; 200-240 VAC, 50/60 Hz |
| Motor thermal protection | Automatic |
| Operating speed | 63.33 Hz: 1900 rpm; 45 Hz: 1350 rpm |
| Cooling | Air-cooled |
| Weight | 24.74 kg |
| Dimensions | Width: 26.0 cm Length: 42.0 cm Height: 29.7 cm |
| Restrictions | No corrosive, explosive, or particulate-forming gases |
| Leak rate | <1 x 10-6 sccs (1 x 10-6 mbar.l/s) |
| Noise level | 53 +/- 2 dB (A) |
| Vibration level at inlet | 7 mms-1 rms |
| Hour meter | Integral hour meter provided |
| Emissions and immunity | EN 61236-1:2013 as a Class A device |
| Safety | EN/IEC 61010 3rd Edition certified |
