In-Line Filters from Agilent
Even small amounts of particulates can clog your column inlet, causing high column backpressure, retention-time shift, resolution loss, and shorter column life. Agilent offers high-pressure in-line filters designed to prevent blockages and extend column lifetime in any HPLC system, available in different dimensions and porosities.
- In-line filters available in 2.1 mm and 4.6 mm frit diameter
- Different porosities from 0.2 µm to 2 µm suit different dispersion needs
- Replaceable frits involve a one-time investment in the filter housing
- Available for Agilent and non-Agilent HPLC instruments
- Designed and manufactured to meet the highest quality requirements
- Jet-weaver mixer with optimized delay volume and highest mixing efficiency
-
Description Frit Porosity Frit Inlet ID Comments Part Number Replacement Frits RRLC in-line filter, 4.6 mm, 0.2 µm pore size filter, connecting capillary 0.17 x 90 mm
0.2 µm 4.6 mm max 600 bar 5067-1553 5067-1562 (10pk) RRLC in-line filter, 2.1 mm, 0.2 µm pore size filter, connecting capillary 0.12 x 70 mm
0.2 µm 2.1 mm max 600 bar 5067-1551 5067-1555 (6pk) Low dispersion in-line filter, 2.1 mm, 2 µm pore size filter, connecting capillary 0.12 x 60 mm 2 µm 2.1 mm <1 mL/min 01090-68702 280959-904 (10pk) 0.5 µm 280959-907 (10pk) Universal in-line filter, 4.8 mm, 2 µm, connecting capillary 0.25 x 130 mm
2 µm 4.8 mm 1 - 5 mL/min 01090-68703 01090-27609 (2pk) Semi-prep filter
0.5 µm 12.7 mm 1 - 5 mL/min 5064-8273 5022-2185 (1pk) High pressure semi-prep filter
10 µm 19 mm 5 - 10 mL/min 5022-2165 5022-2166 (10pk) Prep filter
10 µm 3.3 mm 10 - 100 mL/min 5065-4500 - In-line filter for G1311A Recommended when high salt
concentrations are usedG1311-60006 - 1290 Infinity II in-line filter 0.3 µm
2.0 mm 1300 bar 5067-6189 5023-0271 (5pk)
