ASTM methods
Selected ASTM methods are listed below with the recommended Agilent and/or Thermo Scientific GC column offerings. In some cases, there is more than one phase or column dimension that can be used. When in doubt, it is recommended that you consult the original complete method or contact our technical support team for additional information or help choosing the correct column for your application.
| Method | Title | Recommended Column(s) | Part No. |
| D1945 | Standard Test Method for the Analysis of Natural Gas by GC | HP-PLOT Molesieve, 15 m x 0.53 mm, 50.00 μm | 19095P-MS9 |
| HP-PLOT Q PT, 15 m x 0.53 mm, 40.00 μm | 19095P-QO3PT | ||
| CP-Molsieve 5Å, 10 m x 0.53 mm, 50.00 μm | CP7537 | ||
| PoraPLOT Q-HT, 10 m x 0.53 mm, 20.00 μm | CP7558 | ||
| D1946 | Standard Test Method for the Analysis of Reformed Gas by GC | HP-PLOT Molesieve, 15 m x 0.53 mm, 50.00 μm | 19095P-MS9 |
| HP-PLOT Q PT, 15 m x 0.53 mm, 40.00 μm | 19095P-QO3PT | ||
| CP-Molsieve 5Å, 10 m x 0.53 mm, 50.00 μm | CP7537 | ||
| CP-Molsieve 5Å, 25 m x 0.25 mm, 30.00 μm | CP7533 | ||
| D1983 | Standard Test Method for Fatty Acid Composition by Gas-Liquid Chromatography of Methyl Esters | DB-WAX, 30 m x 0.25 mm, 0.25 μm | 122-7032 |
| TG-WaxMS | 26088-1420 | ||
| D2163 | Standard Test Method for the Analysis of Liquified Petroleum (LP) Gases and Propene Concentrates by GC | HP-PLOT Al2O3 KCl PT, 30 m x 0.53 mm, 15.00 μm | 19095P-K23PT |
| HP-PLOT Al2O3 S PT, 30 m x 0.53 mm, 15.00 μm | 19095P-S23PT | ||
| D2195 | Standard Test Methods for Pentaerythritol | CP-Sil 5 CB, 30 m x 0.53 mm, 1.50 μm | CP8735 |
| D2245 | Oils and oil acids in solvent-reducible paints | TR-FAME | 260M145P |
| D2268 | Standard Test Method for Analysis of High-Purity n-Heptane and Isooctane by Capillary GC | DB-1, 60 m x 0.25 mm, 0.50 μm | 122-106E |
| D2306 | Standard Test Method for C8 Aromatic Hydrocarbons by GC | HP-INNOWax, 60 m x 0.25 mm, 0.25 μm | 19091N-136 |
| TG-WaxMS | 26088-1540 | ||
| D2360 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by GC | HP-INNOWax, 60 m x 0.32 mm, 0.25 μm | 19091N-116 |
| TG-WaxMS | 26088-1550 | ||
| D2426 | Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by GC | DB-1, 30 m x 0.53 mm, 5.00 μm | 125-1035 |
| CP-Sil 5 CB, 30 m x 0.53 mm, 1.50 μm | CP8735 | ||
| D2427 | Standard Test Method for Determination of C2 through C5 Hydrocarbons in Gasoline by GC | DB-1, 30 m x 0.53 mm, 5.00 μm | 125-1035 |
| GS-Alumina PT, 30 m x 0.53 mm | 115-3532PT | ||
| CP-Al2O3/KCl PT, 50 m x 0.53 mm, 10.00 μm | CP7518PT | ||
| D2245 | Standard Test Method for Identification of Oils and Oil Acids in Solvent-Reducible Paints | CP-Sil 88 for FAME, 50 m x 0.25 mm, 0.20 μm | CP7488 |
| D2456 | Polyhydric alcohols in alkyd resin | TG-WaxMS | 26088-2980 |
| D2504 | Standard Test Method for Noncondensable Gases in C2 and Lighter Hydrocarbon Products by GC | HP-PLOT Molesieve, 30 m x 0.53 mm, 50.00 μm | 19095P-MS0 |
| CarboBOND, 25 m x 0.53 mm, 10.00 μm | CP7374 | ||
| D2505 | Standard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by GC | GS-GasPro, 60 m x 0.32 mm | 113-4362 |
| D2580 | Standard Test Method for Phenols in Water by Gas-Liquid Chromatography | CP-FFAP CB, 25 m x 0.53 mm, 1.00 μm | CP7486 |
| TG-5MS | 26098-2230 | ||
| D2593 | Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by GC | GS-Alumina PT, 30 m x 0.53 mm | 115-3532PT |
| CP-Al2O3/KCl PT, 50 m x 0.32 mm, 5.00 μm | CP7515PT | ||
| CP-Al2O3/KCl PT, 50 m x 0.53 mm, 10.00 μm | CP7518PT | ||
| D2712 | Standard Test Method for Hydrocarbon Traces in Propylene Concentrates by GC | GS-Alumina PT, 50 m x 0.53 mm | 115-3552PT |
| D2743 | Standard Practices for Uniformity of Traffic Paint Vehicle Solids by Spectroscopy and Gas Chromatography | CP-Sil 88 for FAME, 50 m x 0.25 mm, 0.20 μm | CP7488 |
| D2753 | Oil and oil acids | TR-FAME | 260M154P |
| D2800 | FAME analysis | TR-FAME | 260M154P |
| D2804 | Standard Test Method for Purity of Methyl Ethyl Ketone by GC | DB-WAX, 30 m x 0.53 mm, 1.00 μm | 125-7032 |
| DB-210, 15 m x 0.53 mm, 1.00 μm | 125-0212 | ||
| CP-Wax 52 CB, 30 m x 0.32 mm, 0.50 μm | CP8763 | ||
| CP-Wax 52 CB, 30 m x 0.53 mm, 1.00 μm | CP8738 | ||
| TG-WaxMS | 26088-2980 | ||
| D2887 | Standard Test Method for Boiling Range Distribution of Petroleum Fractions by GC | DB-2887, 10 m x 0.53 mm, 3.00 μm | 125-2814 |
| CP-SimDist UltiMetal, 5 m x 0.53 mm, 0.88 μm | CP7570 | ||
| CP-SimDist UltiMetal, 10 m x 0.53 mm, 2.65 μm | CP7582 | ||
| CP-SimDist UltiMetal, 5 m x 0.53 mm, 0.17 μm | CP7532 | ||
| D2887 - Extended | Standard Test Method for Boiling Range Distribution of Petroleum Fractions by GC, to C60 | HP-1, 10 m x 0.53 mm, 0.88 μm | 19095Z-021 |
| HP-1, 5 m x 0.53 mm, 0.88 μm | 19095Z-020 | ||
| TR-SimDist | 260S348P | ||
| D2908 | Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection GC | CP-Select 624 CB, 30 m x 0.32 mm, 1.80 μm | CP7414 |
| CP-Select 624 CB, 75 m x 0.53 mm, 3.00 μm | CP7417 | ||
| CP-Wax 52 CB, 30 m x 0.32 mm, 0.50 μm | CP8763 | ||
| CP-Wax 52 CB, 30 m x 0.53 mm, 1.00 μm | CP8738 | ||
| D2998 | Polyhydric alcohols in alkyd resin | TG-1MS | 26099-2970 |
| D3009 | Composition of turpentine | TG-WaxMS | 26088-2240 |
| D3054 | Standard Test Method for Analysis of Cyclohexane by GC | DB-1, 60 m x 0.32 mm, 0.50 μm | 123-106E |
| D3168 | Standard Practice for Qualitative Identification of Polymers in Emulsion Paints | CP-Sil 5 CB, 30 m x 0.32 mm, 1.00 μm | CP8760 |
| CP-Sil 5 CB, 30 m x 0.53 mm, 1.50 μm | CP8735 | ||
| TG-1MS | 26099-2970 | ||
| D3257 | Standard Test Method for Aromatics in Mineral Spirits by GC | DB-624, 30 m x 0.53 mm, 3.00 μm | 125-1334 |
| TG-624 | 26085-3960 | ||
| D3271 | Standard Practice for Direct Injection of Solvent-Reducible Paints into a Gas Chromatograph for Solvent Analysis | PoraPLOT Q, 25 m x 0.53 mm, 20.00 μm | CP7554 |
| CP-Wax 52 CB, 30 m x 0.53 mm, 1.00 μm | CP8738 | ||
| TG-WaxMS | 26088-2980 | ||
| D3304 | PCBs in environmental materials | TG-5MS | 26098-1540 |
| TR-PCB 8MS | 26AJ148P | ||
| D3328 | Standard Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography | CP-Sil 5 CB, 30 m x 0.32 mm, 3.00 μm | CP8687 |
| CP-Sil 5 CB, 30 m x 0.53 mm, 3.00 μm | CP8677 | ||
| D3329 | Standard Test Method for Purity of Methyl Isobutyl Ketone by GC | DB-WAX, 30 m x 0.53 mm, 1.00 μm | 125-7032 |
| DB-624, 30 m x 0.45 mm, 2.55 μm | 124-1334 | ||
| CP-Wax 52 CB, 60 m x 0.53 mm, 1.00 μm | CP8798 | ||
| TG-WaxMS | 26088-2980 | ||
| TG-624 | 26085-3960 | ||
| D3432 | Standard Test Method for Unreacted Toluene Diisocyanates in Urethane Prepolymers and Coating Solutions by GC | HP-1ms, 30 m x 0.32 mm, 1.00 μm | 19091S-713 |
| TG-1MS | 26099-3090 | ||
| D3447 | Standard Test Method for Purity of Halogentated Organic Solvents | DB-624, 30 m x 0.53 mm, 3.00 µm | 125-1334 |
| TG-624 | 26085-3960 | ||
| D3452 | Identification of rubber | TG-1MS | 26099-3090 |
| D3457 | FAME analysis | TR-FAME | 260M145P |
| D3534 | PCBs in water | TG-5MS | 26098-3360 |
| TR-PCB 8MS | 26AJ148P | ||
| D3545 | Standard Test Method for Alcohol Content and Purity of Acetate Esters by GC | DB-624, 30 m x 0.53 mm, 3.00 µm | 125-1334 |
| TG-624 | 26085-3960 | ||
| D3687 | Standard Test Method for Analysis of Organic Vapors Collected by the Activated Charcoal Tube Adsorption Method | DB-WAX, 30 m x 0.53 mm, 1.00 ìm | 125-7032 |
| DB-WAX, 30 m x 0.53 mm, 1.00 µm | 124-7032 | ||
| TG-WaxMS | 26088-2980 | ||
| D3695 | Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection GC | DB-WAX, 30 m x 0.53 mm, 1.00µm | 125-7032 |
| TG-WaxMS | 26088-2980 | ||
| D3710 | Standard Test Method for Boiling Range Distribution of Gasoline and Gasoline Fractions by GC | DB-2887, 10 m x 0.53 mm, 3.00µm | 125-2814 |
| TR-SimDist | 260S348P | ||
| D3760 | Standard Test Method for Analysis of Isopropylbenzene (Cumene) by GC | DB-WAX, 60 m x 0.32 mm, 0.25 µm | 123-7062 |
| HP-1, 50 m x 0.32 mm, 0.52 µm | 19091Z-115 | ||
| TG-WaxMS | 26088-1550 | ||
| D3797 | Standard Test Method for Analysis of o-Xylene by GC | HP-INNOWax, 60 m x 0.32 mm, 0.50 µm | 19091N-216 |
| TG-WaxMS | 26088-2360 | ||
| D3798 | Standard Test Method for Analysis of p-Xylene by GC | HP-INNOWax, 60 m x 0.32 mm, 0.50 µm | 19091N-216 |
| TG-WaxMS | 26088-2360 | ||
| D3871 | Standard Test Method for Purgeable Organic Compounds in Water Using Headspace Sampling | DB-VRX, 75 m x 0.45 mm, 2.55 µm | 124-1574 |
| TG-624 | 26085-4080 | ||
| D3893 | Standard Test Method for Purity of Methyl Amyl Ketone and Methyl Isoamyl Ketone by GC | DB-VRX, 30 m x 0.45 mm, 2.55 µm | 124-1534 |
| TG-624 | 26085-3960 | ||
| D3973 | Standard Test Method for Low-Molecular Weight Halogenated Hydrocarbons in Water | DB-VRX, 30 m x 0.45 mm, 2.55 µm | 124-1534 |
| TG-624 | 26085-3960 | ||
| D4059 | PCBs in insulating liquids | TG-5MS | 26098-1540 |
| TR-PCB 8MS | 26AJ148P | ||
| D4415 | Standard Test Method for Determination of Dimer in Acrylic Acid | DB-FFAP, 30 m x 0.32 mm, 0.25 µm | 123-3232 |
| TG-WaxMS | 26088-1430 | ||
| D4424 | Standard Test Method for Butylene Analysis by GC | HP-PLOT Al2O3 "S", 50 m x 0.53 mm, 15.00 µm | 19095P-S25 |
| D4443 | Standard Test Method for Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl Chloride Homo- and Co-Polymers by Headspace GC | DB-VRX, 30 m x 0.45 mm, 2.55 µm | 124-1534 |
| TG-624 | 26085-3960 | ||
| D4735 | Standard Test Method for Determination of Trace Thiophene in Refined Benzene by GC | DB-FFAP, 30 m x 0.45 mm, 0.85 µm | 124-3232 |
| TG-WaxMS | 26088-2250 | ||
| D4773 | Standard Test Method for Propylene Glycol Monomethyl Ether, Dipropylene Glycol Monomethyl Ether, and Propylene Glycol Monomethyl Ether Acetate | TR-5 | 260E470P |
| D4864 | Standard Test Method for Determination of Traces of Methanol in Propylene Concentrates by GC | DB-WAX, 30 m x 0.45 mm, 0.85 µm | 124-7032 |
| D4947 | Standard Test Method for Chlordane and Heptachlor Residues in Indoor Air | DB-5, 30 m x 0.53 mm, 1.50 µm | 125-5032 |
| DB-608, 30 m x 0.53 mm, 0.83 µm | 125-1730 | ||
| TG-5MS | 26098-3360 | ||
| D4961 | Standard Test Method for GC Analysis of Major Organic Impurities in Phenol Produced by the Cumene Process | DB-FFAP, 30 m x 0.45 mm, 0.85 µm | 124-3232 |
| HP-PLOT Q, 15 m x 0.53 mm, 40.00 µm | 19095P-QO3 | ||
| D4983 | Standard Test Method for Cyclohexylamine Morpholine and Diethylaminoethanol in Water and Condensed Steam by Direct Aqueous Injection GC | HP-5MS, 30 m x 0.32 mm, 1.00 µm | 19091S-213 |
| CAM, 30 m x 0.53 mm, 1.00 µm | 115-2132 | ||
| D3257 | Standard Test Method for Aromatics in Mineral Spirits by GC | DB-624, 30 m x 0.53 mm, 3.00 µm | 125-1334 |
| D3329 | Standard Test Method for Purity of Methyl Isobutyl Ketone by GC | DB-WAX, 30 m x 0.53 mm, 1.00 ìm | 125-7032 |
| DB-624, 30 m x 0.45 mm, 2.55 µm | 124-1334 | ||
| D3432 | Standard Test Method for Unreacted Toluene Diisocyanates in Urethane Prepolymers and Coating Solutions by GC | HP-1MS, 30 m x 0.32 mm, 1.00 µm | 19091S-713 |
| D5008 | Standard Test Method for Ethyl Methyl Pentonal Content and Purity Value of 2-Ethylhexanol by GC | HP-1, 15 m x 0.53 mm, 5.00 µm | 19095Z-621 |
| HP-INNOWax, 30 m x 0.32 mm, 0.25 µm | 19091N-113 | ||
| D5060 | Standard Test Method for Determining Impurities in High-Purity Ethylbenzene by GC | HP-INNOWax, 60 m x 0.32 mm, 0.50 µm | 19091N-216 |
| TG-WaxMS | 26088-2360 | ||
| D5075 | Standard Test Method for Nicotine in Indoor Air | DB-5, 30 m x 0.53 mm, 1.50 µm | 125-5032 |
| DB-5, 30 m x 0.32 mm, 1.00 µm | 123-5033 | ||
| TG-5MS | 26098-2970 | ||
| D5134 | Standard Test Method for Detailed Analysis of Petroleum Naphthas Through n-Nonane by Capillary GC | HP-PONA, 50 m x 0.20 mm, 0.50 µm | 19091S-001 |
| D5135 | Standard Test Method for Analysis of Styrene by Capillary GC | HP-INNOWax, 60 m x 0.32 mm, 0.50 µm | 19091N-216 |
| TG-WaxMS | 26088-2360 | ||
| D5175 | Standard Test Method for Organohalide Pesticides and Polychlorinated Biphenyls in Water by Microextraction and GC | DB-1, 30 m x 0.32 mm, 1.00 µm | 123-1033 |
| DB-608, 30 m x 0.32 mm, 0.50 µm | 123-1730 | ||
| DB-XLB, 30 m x 0.25 mm, 0.25 µm | 122-1232 | ||
| D5303 | Standard Test Method for Trace Carbonyl Sulfide in Propylene by GC | GS-GasPro, 30 m x 0.32 mm | 113-4332 |
| HP-PLOT Q, 30 m x 0.53 mm, 40.00µm | 19095P-QO4 | ||
| D5307 | Standard Test Method for Determination of Boiling Range Distribution of Crude Petroleum by GC | HP-1, 7.5 m x 0.53 mm, 5.00 µm | 19095Z-627 |
| D5310 | Standard Test Method for Tar Acid Composition by Capillary GC | HP-5MS, 30 m x 0.25 mm, 0.25 µm | 19091S-433 |
| DB-225ms, 30 m x 0.25 mm, 0.25 µm | 122-2932 | ||
| D5316 | Standard Test Method for 1, 2-Dibromoethane and 1, 2-Dibromo-3-Chloropropane in Water by Microextraction and GC | HP-1MS, 30 m x 0.32 mm, 1.00 µm | 19091S-713 |
| DB-624, 30 m x 0.45 mm, 2.55 µm | 124-1334 | ||
| D5317 | Standard Test Method for Determination of Chlorinated Organic Acid Compounds in Water by GC with Electron Capture Detector | HP-5MS, 30 m x 0.25 mm, 0.25 µm | 19091S-433 |
| DB-1701P, 30 m x 0.25 mm, 0.25 µm | 122-7732 | ||
| DB-XLB, 30 m x 0.25 mm, 0.25 µm | 122-1232 | ||
| DB-35ms, 30 m x 0.25 mm, 0.25 µm | 122-3832 | ||
| D5320 | Standard Test Method for Determination of 1, 1-Trichloroethane and Methylene Chloride in Stabilized Trichloroethylene and Tetrachloroethylene | DB-1, 30 m x 0.53 mm, 3.00 µm | 125-1034 |
| DB-VRX, 30 m x 0.32 mm, 1.80 µm | 123-1534 | ||
| D5399 | Standard Test Method for Boiling Point Distribution of Hydrocarbon Solvents by GC | DB-2887, 30 m x 0.32 mm, 1.80 µm | 125-2814 |
| TR-SimDist | 260S348P | ||
| D5441 | Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBD) by GC | HP-PONA, 50 m x 0.20 mm, 0.50 µm | 19091S-001 |
| DB-Petro, 100 m x 0.25 mm, 0.50 µm | 122-10A6 | ||
| D5442 | Standard Test Method for Analysis of Petroleum Waxes by GC | DB-1, 25 m x 0.32 mm, 0.25 µm | 123-1022 |
| DB-5, 15 m x 0.25 mm, 0.25 µm | 122-5012 | ||
| TG-1MS | 26099-1430 | ||
| TG-5MS | 26098-1300 | ||
| D5475 | Standard Test Method for Nitrogen- and Phosphorus-Containing Pesticides in Water by GC with a Nitrogen Phosphorus Detector | HP-5MS, 30 m x 0.25 mm, 0.25 µm | 19091S-433 |
| DB-1701P, 30 m x 0.25 mm, 0.25 µm | 122-7732 | ||
| DB-XLB, 30 m x 0.25 mm, 0.25 µm | 122-1232 | ||
| DB-35ms, 30 m x 0.25 mm, 0.25 µm | 122-3832 | ||
| D5480 | Standard Test Method for Engine Oil Volatility by GC | DB-PS1, 15 m x 0.53 mm, 0.15 µm | 145-1011 |
| D5501 | Standard Test Method for Determination of Ethanol Content of Denatured Fuel Ethanol by GC | HP-1, 100 m x 0.25 mm, 0.50 µm | 19091Z-530 |
| D5507 | Standard Test Method for Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multi-dimensional GC | HP-PLOT Q, 15 m x 0.53 mm, 40.00 µm | 19095P-QO3 |
| HP-PLOT U, 30 m x 0.53 mm, 0.20 µm | 19095P-UO4 | ||
| D5508 | Standard Test Method for Determinationof Residual Acrylonitrile Monomer in Styrene-Acyrlonitrile Co-polymer Resins and Nitrile-Butadiene Rubber by Headspace Capillary GC | HP-PLOT Q, 30 m x 0.53 mm, 40.00 µm | 19095P-QO4 |
| D5580 | Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by GC | DB-1, 30 m x 0.53 mm, 5.00 µm | 125-1035 |
| D5599 | Standard Test Method for Determination of Oxygenates in Gasoline by GC and Oxygen Selective Flame Ionization Detection | DB-5, 30 m x 0.25 mm, 0.25 µm | 122-5032 |
| TG-1MS | 26099-3080 | ||
| D5623 | Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by GC and Sulfur Selective Detection | HP-1, 30 m x 0.32 mm, 4.00 µm | 19091Z-613 |
| D5713 | Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary GC | DB-Petro, 50 m x 0.20 mm, 0.50 µm | 128-1056 |
| D5739 | Standard Practice for Oil Spill Source Identification by GC and Positive Ion Electron Impact Low Resolution Mass Spectrometry | DB-5, 30 m x 0.25 mm, 0.25 ìm | 122-5032 |
| DB-TPH, 30 m x 0.32 mm, 0.25 µm | 123-1632 | ||
| TG-5MS | 26098-1420 | ||
| D5769 | Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasoline by GC/MS | HP-1, 60 m x 0.25 mm, 1.00 µm | 19091Z-236 |
| TG-1MS | 26099-3080 | ||
| TG-624 | 26085-3330 | ||
| TG-624SilMS | 26059-3330 | ||
| D5790 | Standard Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column GC/MS | DB-VRX, 60 m x 0.25 mm, 1.40 ìm | 122-1564 |
| DB-VRX, 20 m x 0.18 mm, 1.00 µm | 121-1524 | ||
| DB-624, 60 m x 0.25 mm, 1.40 µm | 122-1364 | ||
| DB-624, 20 m x 0.18 mm, 1.00 µm | 121-1324 | ||
| TG-5MS | 26098-1420 | ||
| D5812 | Standard Test Method for Determination of Organochlotine Pesticides in Water by Capillary Column GC | HP-5MS, 30 m x 0.25 mm, 0.25 µm | 19091S-433 |
| DB-1701P, 30 m x 0.25 mm, 0.25 µm | 122-7732 | ||
| DB-XLB, 30 m x 0.25 mm, 0.25 µm | 122-1232 | ||
| DB-35ms, 30 m x 0.25 mm, 0.25 µm | 122-3832 | ||
| TG-1701MS | 26090-1420 | ||
| TG-17MS | 26089-1420 | ||
| TG-WaxMS | 26088-1550 | ||
| D5917 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by GC and External Calibration | HP-INNOWax, 60 m x 0.32 mm, 0.25 µm | 19091N-116 |
| TR-FAME | 260M154P | ||
| D5974 | Standard Test Method for Fatty and Rosin Acids in Tall Oil Fraction Products by Capillary GC | DB-23, 60 m x 0.25 mm, 0.25 µm | 122-2362 |
| D5986 | Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8-C12 Aromatics and Total Aromatics in Finished Gasoline by GC/FTIR | HP-1, 60 m x 0.53 mm, 5.00 µm | 19095Z-626 |
| TG-5MS | 26098-1420 | ||
| D6144 | Standard Test Method for Trace Impurities in Alpha-Methylstyrene by Capillary GC | HP-1, 60 m x 0.25 mm, 1.00 µm | 19091Z-236 |
| D6159 | Standard Test Method for Determination of Hydrocarbon Impurities in Ethylene by GC | HP-PLOT Al2O3 "KCl", 50 m x 0.53 mm, 15.00 µm | 19095P-K25 |
| GS-Alumina, 50 m x 0.53 mm, | 115-3552 | ||
| DB-1, 50 m x 0.53 mm, | 125-1035 | ||
| D6160 | Standard Test Method for Determination of PCBs in Waste Materials by GC | HP-5MS, 30 m x 0.32 mm, 0.25 µm | 19091S-413 |
| TR-SimDist | 260S250P | ||
| D6352 | Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700 by GC | DB-HT SimDis, 5 m x 0.53 mm, 0.15 µm | 145-1001 |
| TR-SimDist | 260S250P | ||
| D6417 | Standard Test Method for Estimation of Engine Oil Volatility by Capillary GC | DB-HT SimDis, 5 m x 0.53 mm, 0.15 µm | 145-1001 |
| D6584 | Free and Total Glycerin in B-100 Biodiesel | TR-BioDiesel (G) | 26AF024P |
| D6730 | Individual components in spark ignition engine fuels using precolumn | TG-5MS | 26098-2960 |
| TG-624 | 26085-4080 | ||
| E1616 | Standard Test Method for Analysis of Acetic Anhydride Using GC | HP-1, 50 m x 0.32 mm, 0.52 µm | 19091Z-115 |
| TG-WaxMS | 26088-3090 | ||
| E1863 | Standard Test Method for Analysis of Acrylonitrile by GC | DB-WAXetr, 60 m x 0.32 mm, 1.00 µm | 123-7364 |
| TR-SimDist | 260S250P | ||
| E202 | Standard Test Method for Analysis of Ethylene Glycols and Propylene Glycols | DB-624, 30 m x 0.53 mm, 3.00 µm | 125-1334 |
| TR-5 | 260E470P | ||
| E475 | Standard Test Method for Assay of Di-tert-Butyl Peroxide Using GC | HP-5, 30 m x 0.53 mm, 5.00 µm | 19095J-623 |