Agilent CP-Wax 52 CB UltiMetal GC Columns
The J&W CP-Wax 52 CB column phase consists of high-polarity polyethylene glycol (PEG) with a wider temperature range than non-bonded PEG columns, due to extensive crosslinking. This column delivers higher resolution of low boiling point analytes, with guaranteed reproducibility and excellent temperature stability, and is ideal for EPA and ASTM methods that require PEG columns.
The improved line of Agilent J&W CP-Wax 52 CB GC columns utilizes the same innovative inert processes employed in the manufacture of Agilent J&W DB-WAX Ultra Inert columns. These columns have an extended inertness lifetime that withstands repeated temperature cycling to the upper temperature limits of the column, while critical performance parameters such as selectivity, theoretical plates, and retention indices remain unchanged.
Agilent's UltiMetal columns are engineered to combine the robustness of stainless steel with advanced surface deactivation for excellent peak shape.
This phase is also available in standard fused silica material: CP-Wax 52 CB.
- UltiMetal column recommended for working in rugged environments with process or portable instruments
- Polyethylene glycol (PEG) phase
- High polarity, suitable for a broad range of separations
- Excellent column-to-column inertness reproducibility
- Sharp and symmetrical peak shape performance for active polar compounds
- Bonded, crosslinked, and solvent rinsable
- Wider temperature range than non-bonded polyethylene glycols
- High resolution of low boiling point analytes
- Excellent temperature stability for a variety of EPA and ASTM methods
- QC tested with highly demanding test probes
- Performance Summary shipped with each column
Similar phases: Supelcowax 10, Stabilwax, BP-20, 007-CW, Rtx-WAX, ZB-WAX, ZB-WAXPlus
This phase is also available in standard fused silica material: CP-Wax 52 CB.
CP-Wax 52 CB UltiMetal Temperature Specifications
ID | 0.53 mm |
Length | 10 – 50 m |
Film | 1.00 – 2.00 µm |
Temperature Limits | 60 – 250/275°C |