Agilent DB-HeavyWax GC Columns
J&W DB-HeavyWAX Polyethylene Glycol (PEG) is a high-temperature WAX GC column that can operate at higher maximum temperatures (280°C isothermal, 290°C programmed) than standard WAX columns. This allows for shorter run times, providing a lower cost per test. The GC column provides retention time stability and increased column lifetime, even when used at maximum operating temperature.
The ability to bake out the column at the end of the analysis reduces sample matrix effects, limiting carryover and the risk of ghost peaks. The column also exhibits very low bleed, which results in better signal-to-noise ratios and lower detection limits (LOD), especially for late-eluting compounds.
The DB-HeavyWAX column phase is also available in columns designed for Intuvo 9000 GC systems.
- Polyethylene glycol selectivity
- Maximum operating temperatures of 280°C isothermal and 290°C programmed
- Fast analysis, with shorter run times due to extended temperature limit
- Retention time stability and increased column lifetime, even when used at maximum operating temperature
- Ability to bake out the column at the end of the analysis to reduce sample matrix effect and limit carryover and the risk of ghost peaks
- Extended list of analytes to higher molecular weight compounds
- Broader application range for multidimensional GC applications, as the oven temperature can be increased compared to standard WAX column
DB-HeavyWAX Temperature Specifications
ID | 0.10 – 0.32 mm | 0.25 – 0.32 mm |
Length | 10 – 60 m | 30 – 60 m |
Film | 0.10 – 0.25 µm | 0.50 µm |
Temperature Limits | 40 – 280/290°C | 40 – 270/280°C |