Agilent Sample Loops for HPLC
Agilent manufactures a range of high quality loop capillaries suitable for use with a variety of autosampling equipment. Stainless steel loop capillaries are available in 100 µL or 900 µL capacities, designed to deliver robust and high precision performance in various Agilent autosamplers. Other loop capillaries are available in 8, 20 or 40 µL with an even larger capacity 5 mL model also available. Agilent's loop capillaries are ideal replacement and spare parts for autosamplers and are manufactured to exacting quality standards in all areas.
Sample Loop Loading: Partial-filling vs. Complete-filling
Partial-filling
Use the partial-filling method if you need to conserve sample, or if you want to vary sample volume frequently. In partial-filling, the syringe sets the volume injected onto the column. There is no sample waste, and the volume injected onto the column is equal to that dispensed from the syringe. Reproducibility is 1.0% relative standard deviation (RSD). The volume of the sample loaded is limited to half the sample loop volume. For example, the most you can load into a 200 µL sample loop is 100 µL.
This limitation is due to the manner in which fluids move in tubes. Fluidic movement in tubes affects reproducibility.
Complete-filling
Use the complete-filling method if you have a sufficient amount of sample with which to work, you do not vary sample volume, or you need high reproducibility. In complete-filling, the loop sets the volume loaded onto the column. You use excess sample (two to five in loop volumes) to replace all the mobile phase in the loop.
Change the loop to vary the sample volume. Reproducibility is typically 0.1% RSD for loop sizes ³ 5 µL. Accuracy is limited as loop volumes are nominal.
”Which method should I use and which Rheodyne sample injectors use this method?”
There are two types of injectors available: dual mode and single mode. Dual mode injectors allow both partial- and complete-filling whereas single mode injectors allow only complete-filling.
If you are collecting experimental data, sample is scarce, and/or you want to use different sample volumes, a dual mode injector with a large volume sample loop is appropriate. Only dual mode injectors allow the partial-filling method with which you can easily vary your volumes (up to half your sample loop volume) by setting the syringe volume. Once you begin routine analysis, and/or you have an abundance of sample, either a dual mode or single mode injector is appropriate. Both types of injectors allow complete-filling method with which you fill the sample loop in excess. Complete-filling maximizes the reproducibility of your results.
